Tools

Features. This digital torque meter is simple to operate and portable to carry. Large digital display with backlight, supports display of torque value, unit, working mode, data storage number, easy to understand. Two-ways measurement, support adjustable in clockwise and reverse direction, can be used in forward and reverse directions, error: 2% clockwise, 2.5% counterclockwise, more convenient to use with ratchet hand. (Wrench to be purchased separately.) Two working modes, freely switchable between "trace" tracking mode and "peaks" peaking mode. Four units are available, you can adjust between Kgf.cm, N.m, Ibf.ft and Ibf.in depending on your needs. Pre-set values with sound and light alarm, preset values according to the torque to be measured, when the buzzer is switched on and the preset target torque value is reached, the buzzer will sound long and the red light will be on. When used in conjunction with a common ratchet, it becomes a digital torque indicator with the same function as a digital torque plate. (Handle to be purchased separately.) Widely used in the automotive, bicycle and machinery repairing industries. Specifications: Name: Digital Torque Meter Material: plastics Models: TQA2-340, Batteries: 2 * No.7 batteries (not included) Accuracy: 2% clockwise, 2.5% counterclockwise Data storage: 999, 999, 999, 999 Indexing values: 0.01, 0.1, 0.1, 0.1 Display ranges: 0.3-30, 1.35-135, 2-200, 3.4-340 Alarm ranges: 0.9-30, 4-135, 6-200, 10-340 Accuracy guarantee ranges: 20-100%, 20-100%, 20-100%, 20-100% Connection heads size: 1/4inch, 3/8inch, 1/2inch, 1/2inch Operating mode: P(Peaks)/T(Trace) Torque units: kgf.cm/N.m/Ibf.ft/Ibf.in Push button: 6 Operating temperature: -20°C to 70°C Operating humidity: 15-90% Automatic shutdown: 60s Packing List (TQA2-340): 1 * Digital Torque Meter 1 * Screwdriver 1 * Joint Adapter Learn More

degrees celcius / fahrenheit Selection Data Hold function Laser Target Pointer ON/OFF selection Backlight ON/OFF selection Auto Power Shut Off in 7 seconds without any operation The product is used to measure the surface temperature of: Hot water pipes, Hot engine parts, cooking surfaces, hot tubes & Insulation, Electrical connection, ballasts in electric lights Descriptions: EASY TO USE: Point and shoot with clear LCD display Easily switch between °C and °F Back-light included for increased night visibility Normal Mode: When the trigger is depressed, the device will provide continuous temperature readout Can only measure items, can’t measure the human body, and the measurement distance is 0-20CM, otherwise the measurement will be inaccurate. Specification: Model Number: GM320 Max Measuring Temperature: 120°C & Above Style: Handheld Theory: Infrared Thermometer Display Type: Digital Display Size: 1.9 Inches & Under Temperature range: -50 ~ 380℃ (-58~626℉) Accuracy: ±1.5% or ±1.5℃ Resolution: ±1% or ±1℃ Distance Spot Ratio: 0.500694444444444 Emissivity: 0.95 (fixed) Resolution: 0.1℃/0.1℉ Response time: 500m/sec, 95pct response Spectral response: 8 - 14 um Certificate: FCC, RoHS, CE Maximum Show Value: 380 C Working Temperature: 0 to 40 C Red Laser Power: less than 0.5 MW Power supply: 2 x AAA battery (not included) Product Dimension: 140 x 85 x 35mm(L*W*H) Package Content: 1 x Infrared Thermometer Learn More

Watch opening tool kit, 16pc Learn More

Battery Monitor BM2 Main features: 1. Receive battery notification range of conditions when entering BLE 2. Check starting system and charging system (alternator); 3. list the time of each guide; 4. Cell phone alert if some abnormal data; 5. Review story mode voltage in the chart; 6. Short circuit and reverse connection protection 7. Data stored in the device for up to 35 days if out of sync 8. Ultra-low power consumption, average current: 1.0 mA; 9. Connect with the battery directly, no code 10. Free app for iOS and Android users; 11. Compatible with all i-volt batteries for vehicles; voltage: 9-16 V 12. Temp: -40-85C Battery Monitor BM2 principle: check the battery status on the APP phone via Bluetooth 4.0 when the device is installed use for: all 12V Vehicle Battery APP name : Battery Monitor available: Android : 4.3 and higher iPhone : 4S and later iPad : iPad3 and higher Learn More

Battery Monitor BM2 Main features: 1. Receive battery notification range of conditions when entering BLE 2. Check starting system and charging system (alternator); 3. list the time of each guide; 4. Cell phone alert if some abnormal data; 5. Review story mode voltage in the chart; 6. Short circuit and reverse connection protection 7. Data stored in the device for up to 35 days if out of sync 8. Ultra-low power consumption, average current: 1.0 mA; 9. Connect with the battery directly, no code 10. Free app for iOS and Android users; 11. Compatible with all i-volt batteries for vehicles; voltage: 9-16 V 12. Temp: -40-85C Battery Monitor BM2 principle: check the battery status on the APP phone via Bluetooth 4.0 when the device is installed use for: all 12V Vehicle Battery APP name : Battery Monitor available: Android : 4.3 and higher iPhone : 4S and later iPad : iPad3 and higher Learn More

Green: Battery OK/State Good Green/Yellow: Water content less than 1% Green/Yellow/Yellow: Water content close to 2% Green/Yellow/Yellow/Red: Water content close to 3%, recommended to replace the brake fluid Green/Yellow/Yellow/Red/Red: Water content higher than 4%, Dangerous, replace the brake fluid immediately Notice: The above data is for reference only Battery: AAA X1(not Included in package), battery cover is opened in the direction indicated by the arrow. Learn More

Compatible with android/iOS app E-Test for wireless monitoring and recording current, capacity, voltage readouts. Specifications: 1. Input Voltage: 3V - 30V 2.Input current : 0 - 5.1A 3.Cumulative capacity range: 0-99999 mah precision: 0.001 Ah 4.Charge accumulation scope: 0-999999 MWH precision: 0.001 Wh 5.Cumulative power range: 0-299.999W precision: 0.001W 6.Timing the maximum range: 0-999 hours 59 minute 59 seconds precision: 1 second 7.Parameters that you can test: Voltage of battery. Current of battery, discharge capacity of battery,Quantity of electric charge,power of battery,timing. 8.Communication function: Yes 9. Parameters adjusting function :Yes. Equipment for parameters adjustment: One electronic load,one constant current source. Voltage of constant current source should be set to 8.5V There are 3A, 2A, 1A and 0.3A models for current adjusting. Here is a example for 3A: When you set electronic load at 3A model, the current will be adjusted step by step. It will cost you about 10 seconds and you can see the result changing procedure in the LCD screen. When you see the 3A result shown in LCD screen, the adjustment process is finished. You can shut off the electronic load and the parameters will be saved automatically. 10. Clean the data : Push the button until the parameters changed to next sets of parameters. Then release the button. Then the next sets of parameters will be started and they will start from zero. 11. Over voltage or under voltage : Over voltage or under voltage, LCD screen displays a warning symbol and issue rapid beep beep sound. 12. Turn on mode l: The LCD screen will show all parameters within 1s when you connect power supply by Micro USB or male plug of USB with wire.(It is to check whether the LCD screen is good or not).Then you can see the parameters used last time(capacitor and which set of parameters). You also can see the current voltage, current and over voltage or under voltage. Please see following illustration. USB output port can be connected to a data line, a discharge resistor or the like cable device comprising a data communication function, the data does not affect the data transmission line. Test specifications, voltage can not exceed 30V, current can not exceed 5.1A. Note:When the voltage is lower than 3V on the instrument display No display screen or higher than 22V,LCD screen displays a warning symbol and issue rapid beep beep sound, it does not affect the use. Application examples Because mobile phones and digital devices at low battery or full charge, the current and voltage is not a stable value, the application example of the discharge device is a USB 1A or 2A discharge resistor. Note: This data is mobile power discharge capacity, the battery capacity is not, according to our experience, the discharge capacity is about 1.9 times the battery capacity. The former Test Reference Manual Tester discharge capacity value is cleared,and the mobile power is fully charged. Learn More

used to read & diagnose trouble codes, clear trouble codes and detect fuel pressure and so on. After check, the ELM327 Wi-Fi interface will quickly send data to your iPhone, iPad, iPod touch or windows computer from your vehicle in short time. Feature: 1. Works with all OBD-II compliant vehicles 2. Clear trouble codes and turn off the MIL ("Check Engine" light) 3. Small & multifunctional, not occupy space and great for placing in the car 4. Read diagnostic trouble codes,both generic and manufacturer-specific,and display their meaning (over 3000 generic code definitions in the database) 5. User friendly and convenient, you could know the conditions of your car anytime 6. Software included in CD for smart-phone, PC and iOS (iPhone, iPad, iTouch, Mac) 7. Works on all 1996 to 2010 cars and light trucks built in the United States, some 1994 and 1995 models are also OK How to use: Click here Specification: Color: Black SSID: Wi-Fi OBDII Product weight: 70g Antenna: Internal power Range: 50ft (line of sight) Product size: 90*47*27mm Wi-Fi standard: 802.11a/b/g Consumption: 0.75 watts (with power switch) Operating temperature: -15 to 100 Deg Celsius Instruction: 1. Install a compatible automotive diagnostic application in the host device. 2. Plug this OBD2 Wi-Fi scanner into your car, connect it to a Wi-Fi enabled device. 3. Then the ELM327 interface will quickly send data to your iPhone,iPad,iPod Touch or windows computer from your vehicle. 4. Following are some of the parameters which could be read from the vehicle: RPM Fuel Trim Fuel Level Fuel Pressure Vehicle Speed Mass Air Flow Air Intake Temp Timing Advance Throttle Position Fuel Consumption Barometric Pressure Engine Coolant Temp Calculated Engine Load Intake Manifold Pressure EVAP System Vapor Pressure Note: Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer’s implementation. Package Included: 1 X ELM327 Wi-Fi OBDII Interface Diagnostic Scanner Apple iOS 10 / 9 / 8 APPLICATIONS DETAILS OBD Auto Doctor ( Free App ) EOBD Facile ( Free App ) DashCommand ( Paid App ) EngineLink( Paid App ) REV ( Paid App ) NovaScan - The OBD Total Solution ( Paid App ) BMWhat (Only BMW) ( Paid App ) OBD2 Scanner ( Paid App ) iPad Optimized Apps ( Paid App ) DashCommand ( Paid App ) iCanOBD2 (Only VW, Audi, Seat, Skoda) ( Paid App ) Engine Link HD Android Application List ScanMaster Lite Torque Lite (OBD2 & Car) (Free App ) OBD2-ELM327 Car Diagnostics (Free App ) OBD Dashboard (Free App ) Carista OBD2 (Free App ) ScanMyOpel Lite (Free App ) OBDLink (Free App ) hobDrive Demo (Free App ) OBD Car Doctor (Free App ) EcoShifter OBD2 Car (Free App ) Scanator Android (in-app purchases) (Free App ) Efficiency (Free App ) VAG DTC Fault Memory erase (Free App ) BMWhat Lite (Free App ) DashCommand ( Paid App ) Torque Pro ( Paid App ) ScanMyOpel ( Paid App ) hobDrive ( Paid App ) OBD Car Doctor Pro ( Paid App ) OBD DROIDSCAN PRO ( Paid App ) TouchScan (OBD Diagnostics) ( Paid App ) Efficiency Pro ( Paid App ) BMWhat (Only BMW) ( Paid App ) Learn More

For BMW INPA/Ediabas K D-CAN /DCAN USB Interface OBD2 EOBD Diagnostic Cable Learn More